Autopatch setup

The easiest of the batch. Simply change the single line:

noload => chan_sip.so ;

to

load => chan_sip.so ;

This tells the software to load the code supporting SIP (Session Initiation Protocol, if you're curious)

change:

callerid = "Repeater" <0000000000>	; callerid for phone calls

(Note, I believe the software puts the machine name here, which is Repeater by default)

to whatever text and phone number you want your callerID to show, when the voip provider makes the call.

NOTE: You must set the number to a valid 10 digit phone number. If you leave it all zeros for testing (like I did), then when voip.ms tries to make a call, nothing will happen because the callerID is invalid. Again, YMMV with a different voip provider.

Add the line:

context = voipms ; Autopatch addon ; 

I added this right after the callerid line.

Change the line:

61 = autopatchup,noct = 1,farenddisconnect = 1,dialtime = 20000  ; Autopatch up

to:

61 = autopatchup,context = voipms,noct = 1,farenddisconnect = 1,dialtime = 20000,quiet = 1  ; Autopatch up

All I did is add the options context = voipms and quiet = 1. The options can be in any order. context links to the entries we'll make in sip.conf, and if quiet is set to 0, it just didn't work with voip.ms for me.

What this means is when you send ​ *61<number> from your radio, it will send <number> to the sip provider specified in sip.conf. When you send ​ *62, it will hang up. Obviously, customize these to numbers you want to use, if you don't like the defaults.

I noticed a bunch of other DTMF commands in the file, which worked as described. One section I was particularly interested in was the Control Operator (cop) items. I wanted to be able to enable/disable things via DTMF, and these do exactly that. I uncommented (and changed the numbers for) items like:

902 = cop,2    ;  system enable
903 = cop,3    ;  system disable

That'll let you enable/disable the entire system, plus do any other functions listed there. When testing I was getting Tx held high (see NOTE below). I couldn't use any DTMF codes, since the radio was transmitting. I did find that the following command in the ASL Asterisk CLI lets you use these directly:

rpt fun <node #> *<code>

So, if your node number is 12345, typing "rpt fun 12345 *903" will disable the system. And "rpt fun 12345 *62" will hang up the call in progress. Pretty handy to know when testing everything.

NOTE: I changed the duplex from 1 to 2, since the comments in the file said it was preferred when interfacing with a repeater (which this will eventually). Unfortunately, when not talking to a repeater, this just held Tx on until things timed out. Changing it back to 1 fixed that.

Comment out (or remove) the line:

bindaddr = 127.0.0.1		; IP address to bind to (0.0.0.0 binds to all)

to:

;bindaddr = 127.0.0.1		; IP address to bind to (0.0.0.0 binds to all)

This cost me a few hours. I was getting what seemed like a totally unrelated, and very vague, error message on startup when I had the sip module loading. Eventually, I commented out this entire file, and found this was the offending line. I don't know why it didn't work, or why commenting it out fixed it.

One nice thing about the rest of this config file, voip.ms has a page with the required settings! Once you're logged into their main site, you can follow this link to find them. I'll place mine here too, just for reference…

register => <userid>:<password>@sanjose1.voip.ms:5060

[voipms]

canreinvite=no

context=voipms

host=sanjose1.voip.ms

secret=<password>

type=peer

username=<userid>

disallow=all

allow=ulaw

fromuser=<userid>

trustrpid=yes

sendrpid=yes

insecure=invite

nat=yes

In the [pstn-out] section, comment out:

exten = _NXXNXXXXXX,1,playback(ss-noservice)

exten = _NXXNXXXXXX,2,Congestion

So they look like:

nexten = _NXXNXXXXXX,1,playback(ss-noservice)

;exten = _NXXNXXXXXX,2,Congestion

Again, if you're using voip.ms, they have the next section listed out, which I added right after the [pstn-out] sections, but I added one more thing…

[voipms]

;include => voipms-inbound

include => voipms-outbound

;[voipms-inbound]

;exten => _X.,1,Ringing

;exten => _X.,n,Answer()

;exten => _X.,n,Rpt(41899|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120) 75

;exten => _X.,n,Hangup

; THIS IS FOR OUTGOING AUTOPATCH CALLS

[voipms-outbound]

exten => _1NXXNXXXXXX,1,Dial(SIP/${EXTEN}@voipms)

exten => _1NXXNXXXXXX,n,Hangup()

exten => _NXXNXXXXXX,1,Dial(SIP/1${EXTEN}@voipms)

exten => _NXXNXXXXXX,n,Hangup()

exten => _NXXX,1,Dial(SIP/${EXTEN}@voipms)        ; <-- added this line

exten => _NXXX,n,Hangup()                                        ; <-- added this line

exten => _011.,1,Dial(SIP/${EXTEN}@voipms)

exten => _011.,n,Hangup()

exten => _00.,1,Dial(SIP/${EXTEN}@voipms)

exten => _00.,n,Hangup()

This enables only outbound calling. I added the two lines:

exten => _NXXX,1,Dial(SIP/${EXTEN}@voipms)

exten => _NXXX,n,Hangup()

Without these patterns, you can't use the 4 digit codes from voip.ms for testing.

Also, I figured out that you can insert actions to happen after the call is dialed, and before the hangup. I added the following line in between the Dial and Hangup lines to send a Pushover notification to my phone whenever an autopatch call is made. This fires when the call completes.

exten => h,1,System(curl -k -X POST "https://api.pushover.net/1/messages.json?token=<token>&user=<user>&message=autopatch+has+made+a+call")

And another addition, an absolute call timer that terminates a call, so someone doesn't spend 30 minutes chatting on the phone, tying up the repeater. Adding the "L(x:y:z)" function to the Dial command terminates after "x" number of milliseconds, starts warning when "y" seconds remain, and repeats the warning every "z" seconds. Replacing the Dial lines with lines that look like this:

exten => _1NXXNXXXXXX,1,Dial(SIP/${EXTEN}@voipms,15,L(300000:60000:20000))

This terminates the call after 5 minutes, starts warning when 1 minute remains, repeating the countdown every 20 seconds until it hangs up. Or, and the 15 is how many seconds the system lets a call ring.

ONE FINAL NOTE

Everything seemed to work fine, except the '3' DTMF, when sent from a Baofeng, didn't register. Also, nearly all the "lower" digits didn't register if sent from a Kenwood V71. Found a comment in a thread (here) that suggested changing "deemphasis" in the simpleusb.conf file. Made the change from "no" to "yes", everything now seems to work just fine…

deemphasis = yes     ; enable de-emphasis (input from descriminator)

And that's it! With those changes, I was able to make calls from my HT, talking to the AllStarLink, which in turn talked to voip.ms and connected the calls. The quality varies, as you might expect, but it's definitely usable.

Right now, this has all the functionality I need. I'm experimenting with removing courtesy and other tones to keep things quieter when we put it on the repeater frequency. I'm also going create multiple clones to geographically distribute amongst local Hams, using cheaper, reliable Motorola commercial radios. I'll be adding some watchdogs that notify me if things aren't responding as expected. I'll document those when I have them running smoothly.

I've also gotten things working with hamvoip, and will be deploying a version of that as well. Then try to get all the config files unified.